Intel AXXSW1GB - Manual (Page 77)

64 Intel® Gigabit Ethernet Switch AXXSW1GB User Guide
Mapping Groups to VLANs
The Mapping Groups to VLAN Page allows network managers to assign specific
interfaces to specific VLAN groups. To map interfaces to VLAN groups:
1. Click Layer 2 > VLANS > VLAN Groups > Mapping Groups to VLAN. The
Mapping Groups to VLAN Page opens:
Figure 49. Mapping Groups to VLAN Page
The Mapping Groups to VLAN Page contains the following fields:
• Group Type — Displays the VLAN Group type to which the interface is attached.
The possible field values are:
— MAC-based — Indicates the interface is attached to a MAC based VLAN group.
— Subnet-based — Indicates the interface is attached to a Subnet based VLAN
group.
— Protocol-based — Indicates the interface is attached to a Protocol based VLAN
group.
• Interface — Displays the interface attached to the VLAN group.
• Group ID — Displays the VLAN Group ID.
• VLAN ID — Displays the VLAN ID.