Intel AXXSW1GB - Manual (Page 55)

42 Intel® Gigabit Ethernet Switch AXXSW1GB User Guide
Configuring LACP
LAG ports can contain different media types if the ports are operating at the same speed.
Aggregated links can be set up manually or automatically established by enabling LACP
on the relevant links. Aggregate ports can be linked into link-aggregation port-groups.
Each group is comprised of ports with the same speed. The LACP Parameters Page
contains fields for configuring LACP LAGs.
To configure LACP for LAGs:
1. Click Layer 2 > Interface > LACP Parameters. The LACP Parameters Page
opens:
Figure 29. LACP Parameters Page
The LACP Parameters Page contains the following fields:
• LACP System Priority — Specifies system priority value. The field range is 1-
65535. The field default is 1.
• Port — Displays the port number to which timeout and priority values are assigned.
• Port-Priority — Displays the LACP priority value for the port. The field range is 1-
65535. The field default is 1.
• LACP Timeout — Displays the administrative LACP timeout. The possible field
values are:
— Long — Specifies the long timeout value.
— Short — Specifies the short timeout value.