Intel AXXSW1GB - Manual (Page 64)

Intel® Gigabit Ethernet Switch AXXSW1GB User Guide 51
• Interface Status — Indicates the port status. The possible field values are:
— Excluded — Excludes the interface from the VLAN. However, the interface can
be added to the VLAN through GARP.
— Forbidden — Denies the interface VLAN membership, even if GARP indicates
the port is to be added.
— Tagged — Indicates the interface is a tagged member of a VLAN. All packets
forwarded by the interface are tagged. The packets contain VLAN information.
— Untagged — Indicates the interface is an untagged VLAN member. Packets
forwarded by the interface are untagged.
• Interface Mode — Displays the interface mode. The possible field values are:
— General — Indicates the port belongs to VLANs, and each VLAN is user-
defined as tagged or untagged (full IEEE802.1q mode). The is the default value.
— Trunk — Indicates the port belongs to VLANs in which all VLANs are tagged,
except for one VLAN that can be untagged.
— Access — Indicates a port belongs to a single untagged VLAN. When a port is in
Access mode, the packet types which are accepted on the port cannot be
designated. Ingress filtering cannot be enabled or disabled on an access port.
2. Define the relevant fields.
3. Click
. The VLAN membership is defined, and the device is updated.