Inter-Tel ENDPOINT 8690 - Manual (Page 92)

86 Inter-Tel ® Model 8690 User Guide (ITP Mode)
MOVIN
G
ON
P
ROGRAMMING
R
EMOTE
F
EATURE
A
CCESS
If you are away from your desk and forgot to put your endpoint in DND, don’t worry.
With the Remote Feature Access, you can place your endpoint in DND or forward
calls from any other endpoint on the system. And, if you have a special dial-up line,
you can access your endpoint features from an outside line.
Remote Access Password
Before you use Remote Feature Access, you should program a password, as described
below.
To change the password from your endpoint:
1. Dial .
2. Enter your current password, followed by .
NOTE: Your extension number is your password by default.
3. Enter the new password followed by . You hear a confirmation tone.
4. Enter the new password again for verification followed by . You hear a con-
firmation tone.
To change the station password using remote programming, see Remote Feature
Access on page 87 . To change your station password using Unified Communicator,
see Using Advanced Options on page 39 .
3 9 2
#
#
#