IBM ATM OC-3c - Manual (Page 12)

1-2 C HAPTER 1: F EATURES AND B ENEFITS
ATM Module Features
The following list summarizes the ATM Module
features. These features are described in more detail
in this guide.
■ Conforms to ATM Forum Standards
■ OC-3c 155Mbps Interface
■
SONET (STS 3c) and SDH (STM-1) compliant
■
Multi-mode Fiber, SC connectors
■ LAN Emulation (LANE) version 1.0
■
16 Emulated LAN Clients
■
512 Virtual Circuits
■
1024 remote MAC Addresses
■ User-To-Network Interface (UNI) version 3.0 and 3.1
■ Interim Local Management Interface (ILMI)
■ AAL5 ATM Adaptation Layer
■ 16 Virtual LANs (VLANs)
■ RMON per Emulated LAN. RMON Groups supported:
■ Alarms
■
Events
■
Statistics
■
History
■ Data buffer to store 40,000 ATM cells
■ High performance with fast data transfer
■
Wire Rate Transmission on ATM port
■
Low Latency (68 microseconds when using
Store and Forward traffic management between
ATM and Ethernet components)
■ Resilient Links protect your network against cable
and equipment failure
■ SNMP management
■ Telnet and local management (using VT100
screens)
Cabling and environmental specifications are listed in
Appendix C, ‘ATM Module Technical Specifications”.