IBM ATM OC-3c - Manual (Page 52)

7-4 C HAPTER 7: A CCESSING M ANAGEMENT F EATURES
To find out which ATM screens can be accessed for
each of the security levels, refer to Appendix B,
“Screen Access Rights”.
For access rights to Switch screens, see the user guide
that accompanies your Switch.
When you have logged on, the Main Menu screen is
displayed, as shown in Figure 7-4.
Logging Off
When you have finished using the facility, select the
LOGOFF option from the bottom of the Main Menu.
If you accessed the facility using a Telnet session or
modem, the connection will be closed automatically.
Figure 7-4 Main Screen
Automatic Logout
There is a built-in security timeout on the VT100
interface. If you do not press any keys for three
minutes, a message warns you that the inactivity
timer is about to expire. If you do not press a key
within 10 seconds, the timer will expire and the
screen will be locked; any displayed statistics will
continue to be updated. When you next press any
key, the display changes to the Auto Logout screen.
The Auto Logout screen asks you to enter your
password again. If the password is correctly entered,
the screen that was active when the timer expired is
re-displayed. If you make a mistake entering your
password, you are returned to the Logon screen.
Table 7-1 Default Users
User Name Default
Password Access Level
monitor monitor monitor — this user can view, but
not change settings on the screens
they can access.
manager manager manager — this user can view and
change the operational parameters
(but not the special/security
features) on the screens they can
access.
security security security — this user can view and
change all manageable parameters
on the screens they can access.
admin (no password) security — this user can view and
change all manageable parameters
on the screens they can access.