IBM ATM OC-3c - Manual (Page 58)

8-6 C HAPTER 8: M ANAGING THE ATM M ODULE
Figure 8-5 VLAN Selected Screen
Figure 8-6 Switch VLAN Setup Screen
Use [Ctrl]+[D] keys to scroll down the list box to view
the rest of the list, including the ATM port.
The ATM port is shown as ATM in the Type field, or as
ATM Bp if it has been set up as a backbone port.
ATM Port Setup
The ATM Port Setup screen allows you to switch the
ATM port on or off, and provides status information
about the state of the port, and the LECs associated
with each of the VLANs. To display the screen:
1 From the Main Menu select SWITCH MANAGEMENT.
The Switch Management screen is displayed, as
shown in Figure 8-4 on page 8-5.
2 For the Management Level field, select the Port option.
3 Ensure that the ATM port number is entered in the
Port ID field. For example the ATM port is:
■ Port 13 on an IBM 8271 Nways Ethernet LAN
Switch Model 612 and IBM 8271 Nways Ethernet
LAN Switch Model 712
■ Port 25 on IBM 8271 Nways Ethernet LAN Switch
Model 624 and IBM 8271 Nways Ethernet LAN
Switch Model 524
4 Select the SETUP button to display ATM port setup
information. An example of the ATM Port Setup
screen is shown in Figure 8-7 on page 8-7.