Intellinet Network Solutions Wireless G Broadband Router 523431 - Manual (Page 14)

14
3.2 Windows XP Setup
1. Install the Wireless G Broadband Router.
2. Start Windows XP and check whether the LAN LED is on or off. If off, confirm
that the connection between the computer and the router is correct.
3. Click “Start” —> “Setting” —> “Control Panel.”
4. Double-click “Network and Internet Connections” in “Control Panel.”
5. Click “Network Connection” —> “Local Area Connection” —> “Properties” —>
“Internet Protocol (TCP/IP)” and “Properties.”
6. Click “General“; select “Obtain an IP address automatically” and “Obtain DNS
server address automatically.”
7. Click “OK.”