Intellinet Network Solutions Wireless G Broadband Router 523431 - Manual (Page 19)

19
3. You will then see the following login Web page. Click the “Login” button to enter
the configuration and configure the router manually. This may be required if the
Internet Wizard or Wireless Wizard fail to
detect the settings automatically.
The Internet Wizard lets you configure your
Internet connection quickly and conveniently.
The Wireless Wizard helps you configure all
important wireless-related settings.
You can login directly without account and
password confirmation because there is no
account information required by default. It is
recommended that a password is assigned
immediately.
Conn. Type: The router’s current connection
type. Dynamic IP (DHCP) is the default value.
Conn. Status: The router’s current
connection status.
WAN IP: The router’s current WAN (Internet)
IP address.
Connected PC: The IP address of the
computer that connects to the router.
4.2 PPPoE Configuration
This connection option is suitable for a virtual dial-up Internet connection.
1. Open the external ADSL modem and check the WAN LED of the router. If the
WAN LED is off, check the network cable between the external modem’s
LAN/Ethernet port and the router’s WAN port.
2. Click “Basic setup” —> “WAN setup” as shown.