Intellinet Network Solutions Wireless G Broadband Router 523431 - Manual (Page 34)

34
Add hardware address & IP pair on the real network: This function lets you find
all computers currently connected and allows you to make their IP address
assignment permanent. Check the box in front of the IP address and click on “Add.”
Add hardware address & IP pair manually: If this option is enabled, the IP
address and physical address (MAC address) need to be entered manually.
Note: In order to use DHCP function of the router, the TCP/IP protocol of
the connected computers must be configured as “Obtain an IP Address
automatically” (default setting). Also, save the router configuration after
completion; otherwise, the configuration will be lost after the router is
restarted.
4.6.4 Link Setup/Info
Click “Basic setup” —> ”Link Setup/Info.”