Intel SERVER SYSTEM SR2500AL - Manual (Page 105)

Intel® Server System SR2500AL User’s Guide 83
13. Remove the six screws from the server board (see letter “A”) and lift the server
board from the server system (see letter “B”).
Figure 72. Removing the Server Board
14. Replace the server board. For instructions, see “Installing the Server Board” .
15. Connect all power cables to the server board.
16. Install the fan module assembly. For instructions, see
“Replacing a Fan Module” .
17. Install the large air baffle. For instructions, see “Installing the Large Air Baffle” .
18. Install the bridge board. For instructions, see Figure 64 “Installing the Bridge
Board into the Server System” on page -73 .
19. Install the optical drive cable (optional).
20. Install the PCI riser assembly. For instructions, see
“Installing the PCI Riser
Assembly” .
21. Install the processor air duct. For instructions, see “Installing the Processor Air
Duct” .
22. Install the server system cover. For instructions, see “Installing the Server System
Cover” .
23. Plug all peripheral devices and the AC power cable(s) into the server.
AF000026
B
A