Intel SC5400 - Manual (Page 30)

12 Intel® Server Chassis SC5400 User’s Guide
Standard and Optional Hot-swap Drive Bays
One bay supporting six cabled drives ships with the standard chassis. Optional hot swap
drive bays may replace the six-drive fixed drive bay. An optional four-drive fixed drive
bay (for cabled drives) is available. No tools are required to replace the fixed drive bays.
Optional four-drive and six-drive SAS/SATA and SCSI hot-swap drive bays are available.
For instructions on installing hard drives, see “Removing and Installing Hot Swap
Drive(s)” on page 42 .
Note: Drives can consume up to 17 watts of power each. Drives must be specified to run at a
maximum ambient temperature of 45C.
The Intel
®
Server Chassis SC5400 does not support all SAS, SATA, or SCSI hard drives.
See “Additional Information and Software” on page ix for an Internet link to a list of
supported hardware.
Floppy / CD-ROM / DVD-ROM Slimline Carriers
For installation instructions on installing a floppy drive see “Installing and Removing a
Slimline USB Floppy/CD/DVD Combo Kit” on page 26 . For installation instructions on
installing a CD-ROM drive or DVD-ROM drive, see “Removing and Installing a DVD or
CD-ROM Drive” on page 27 .
To use one of the drives provided by Intel, use the following order codes:
• Slimline CD-ROM Drive: AXXSCD
• Slimline DVD/CDR Drive: AXXDVDCDR
• Slimline Floppy Drive: AXXCDUSBFDBRK
Note: The Intel
®
Server Chassis SC5400 does not support all slimline floppy, CD-ROM or
DVD-ROM hard drives. See “Additional Information and Software” on page ix for an
Internet link to a list of supported hardware. Intel provides accessory kits for these drives.