Intel SC5400 - Manual (Page 45)

Intel® Server Chassis SC5400 User’s Guide 27
7. If not replacing with another drive, re-attach pair of slides to an EMI shield and re-
insert EMI shield/slide assembly into chassis for proper airflow.
Figure 18. Re-inserting Empty EMI Shield/Slide Assembly into Chassis
8. Install the front bezel. For instructions, see “Removing and Installing the Front
Bezel” on page 18 .
9. Install the chassis cover. For instructions, see “Installing the Chassis Cover” on
page 17 .
10. Plug all peripheral devices and the AC power cable into the server.
11. Power up the server.
Removing and Installing a DVD or CD-ROM
Drive
Removing a DVD or CD-ROM Drive
1. Observe the safety and ESD precautions at the beginning of this book.
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the chassis cover. For instructions, see
“Removing the Chassis Cover” on
page 16 .
4. Remove the front bezel if it is installed. For instructions, see “Removing and
Installing the Front Bezel” on page 18 .
5. Disconnect the power and data cables to the DVD/CD-ROM drive.
AF000605