Presetting stations, English, Selecting a radio station – JVC CA-MD9R User Manual
Page 16
12
English
1
2
3
4
5
6
7
8
9
10
+10
EON ON/OFF
PTY SELECT
PTY
SEARCH
TA/NEWS/
INFO
DISPLAY
MODE
TUNER
MULTI JOG
SET
MULTI JOG
SET
Selecting a Radio Station
—————————————————————
❏ Press the
or
button on the unit repeatedly.
The frequency changes in one step increments. “TUNED” appears on the display when a station
is tuned in.
❏ Press and hold the
or
button for a few seconds, the frequency changes
continuously until a station is tuned in. “TUNED” appears on the display.
❏ Possible only after presetting stations (For presetting methods, see “Presetting Stations” below).
Using the unit
Select a preset channel by rotating the MULTI JOG dial clockwise or counterclockwise.
Using the Remote Control
1. Press the TUNER button so that you can receive the most recent station tuned in.
2. Press the number button for the preset station you want.
❏ Example: For channel 5, press 5. For channel 15, press +10 then 5. For channel 20, press
+10, then 10. For channel 30, press +10 two times, then 10.
Presetting Stations
You can store up to 30 stations (FM and AM (MW/LW)).
To do the following procedure, use the buttons on the unit.
Note: In some cases, test frequencies have been already memorized for the tuner since the factory
examined the tuner preset function before shipment. This is not a malfunction. You can preset the
stations you want into memory by following the presetting method.
1.
Tune to a station you want to preset (see “Tuning in a Station” on page 11).
2.
Press the SET button.
On the display, “– –” (preset number position) will flash for 5 seconds.
❏ During these 5 seconds while the indication on the display is flashing, you can assign a
channel number to the station and enter it into the memory.
3.
Rotate the MULTI JOG dial clockwise or counterclockwise to select a preset number.
4.
Press the SET button again.
“MEMORY” appears on the display and the selected station will be preset in the channel
number you have specified.
❏ If a station has been previously stored in the same channel number, it will be erased and the
newly selected station will be stored.
5.
Repeat steps 1 to 4 for each station you want to store in memory using different preset numbers.
CAUTION: If the unit is unplugged or if a power failure occurs, the preset stations will be erased in
a few days. If this happens, preset the station again.
CD
PROGRAM
R·D·S EON
TA NEWS INFO
SLEEP
DAILY
REC 1 2 3
1 CD MD ALL
RANDOM
REPEAT
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
3
2
1
2
1
MD
3
STEREO
TUNED
TA NEWS INFO
MD
CD
EON
CD
PROGRAM
R·D·S EON
TA NEWS INFO
SLEEP
DAILY
REC 1 2 3
1 CD MD ALL
RANDOM
REPEAT
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
3
2
1
2
1
MD
3
STEREO
TUNED
TA NEWS INFO
MD
CD
EON
EN.01-24.CA-MD9R[E]/F
6/16/98, 1:49 PM
12