JVC CA-MD9R - Manual (Page 33)

29
English
2.
Press one of the MD buttons (1 to 3) to select an MD.
The MD and track numbers start flashing.
❏ If the MD and track numbers stop flashing, press the MD button (1 to 3) again.
3.
Rotate the MULTI JOG dial to select a track.
The track number appears on the display.
4.
Press the SET button.
The MD and track numbers stop flashing, and the step number is shown.
5.
Repeat steps 2 to 4 to select the other tracks for the program.
❏ To select another track from the same MD, repeat steps 3 and 4.
❏ To select another track from a different MD, repeat steps 2 and 4.
6.
Press the ‹/8 button.
The unit plays the tracks in the order you have programed them.
Using the Remote Control
1.
On the unit, press the PLAY MODE button repeatedly until the PROGRAM indicator lights up on
the display.
“MD PROGRAM” also appears on the display.
❏ If you have already made a program, the last step of the previous program is displayed
instead of “MD PROGRAM” unless you have erased the program.
❏ Each time you press the PLAY MODE button, MD play mode changes as follows:
= MD PROGRAM = MD RANDOM = Off (Continuous Play) = (back to the beginning)
2.
Press the MD button on the Remote Control.
The Remote Control is set to the MD operation mode.
MD 3
MD
2
MD
1
Step
number
CD
PROGRAM
MD
CD
15
3
2
1
2
1
3
MD
CD
PROGRAM
MD
CD
15
3
2
1
2
1
MD
3
MULTI JOG
SET
CD
PROGRAM
MD
CD
3
2
1
2
1
MD
3
MD
/
PLAY MODE
CD
PROGRAM
MD
CD
15
3
2
1
2
1
MD
3
MD
number Track
number
EN.25-40.CA-MD9R[E]/F 6/16/98, 1:50 PM 29