JVC CA-MD9R - Manual (Page 44)

40
English
First Track Recording (1ST TRACK REC)
The 1ST TRACK REC function allows you to record the first track of each loaded CD. You can, for
example, make a directory of all your best CDs.
1.
Prepare CDs, and a recordable MD into the MD1 loading slot.
❏ Always place a CD on the CD1 tray and insert the recordable MD into the MD1 loading
slot. If not, this function does not work.
2.
Press the 1ST TRACK REC button.
The indicator next to the 1ST TRACK REC button lights up and the recording starts.
When the first track of the CD1 is recorded, the first track of the CD2 will be recorded.
Recording continues until the first track of each loaded CD is recorded.
3.
Replace the CDs on the trays not selected.
❏ You can change CDs to continue the First Track Recording using more than 3 CDs.
Changing the Display Mode —————————————————————
You can check the CD track number and MD track number while recording.
Press and hold the DISPLAY/CHARA button on the unit. While holding the button, the following
information appears on the display.
1ST TRACK REC
CD
1
3
2
1
2
1
3
CD MD
Remaining time of
the current track Remaining time
of the MD
\
CD
1
3
2
1
2
1
3
CD MD
Appears only when
using an 8 cm CD
DISPLAY
/CHARA
CD track number currently playing
MD
1 2 3 4 5 6
3
2
1
2
1
3
CD MD
MD track number being recorded
EN.25-40.CA-MD9R[E]/F 6/16/98, 1:51 PM 40