JVC CA-MD9R - Manual (Page 8)

4
English
CAUTION: Make all connections before plugging the unit into an AC power outlet.
Connecting the FM Antenna
A. Using the Supplied FM Antenna
The FM antenna provided can be connected to the FM 75
Ω
COAXIAL terminal as
temporary measure.
Extend the supplied FM antenna horizontally.
B. Using the Coaxial Type Connector (Not Supplied)
A 75
Ω
antenna with coaxial type connector (DIN 45332) should be connected to
the FM 75
Ω
COAXIAL terminal.
A
B
CAUTION: To avoid noise, keep antennas away from metallic parts of the CA-MD9R, connecting cord and the AC power cord.
FM Antenna
Outside FM Antenna Wire
Before attaching a
75 ohm coaxial lead
(the kind with a
round wire going to
an outside antenna),
disconnect the
supplied FM
antenna.
Connecting the AM (MW/LW) Antenna
AM
LOOP
GND
AM EXT
FM 75
COAXIAL
ANTENNA
ANTENNA
AM EXT
GND
FM 75
COAXIAL
AM
LOOP
ANTENNA
AM EXT
GND
FM 75
COAXIAL
AM
LOOP
2
3 1
Snap the tabs on the loop
into the slots of the base to
attach the AM Loop.
AM Loop Antenna
Turn the loop until you
have the best reception
If reception is poor,
connect the outside
antenna.
AM
LOOP
GND
AM EXT
FM 75
COAXIAL
ANTENNA
Note: Even when connecting
an outside AM antenna,
keep the indoor AM loop
connected.
AM Antenna Wire (not supplied)
If reception is poor, connect the outside antenna.
EN.01-24.CA-MD9R[E]/F 6/16/98, 1:48 PM 4