Glossary, English, Navigation system – JVC KD-NX901 User Manual

Page 110: Playback sources, Sound adjustments, General settings—psm, Other main functions

Advertising
background image

110

ENGLISH

Glossary

Navigation System

DST
Stands for destination for this Navigation
System.

ETA
Estimated Time of Arrival.

GPS
Global Positioning System.
By receiving the GPS signals from the
satellites, the Navigation System determines the
position of the car.

P.O.I.
Points of Interest.
You can select your destinations by selecting
from the categories—such as business centres,
shopping centres.

TMC
Traffic Message Channel.
Traffic messages transmitted by some VHF
broadcasters via RDS signals.
Using this data, the Navigation System
performs dynamic navigation.

Via Point
A location through which you reach your final
destination. For this Navigation System, you
can determine five locations through which you
can reach your final destination.

Playback sources

Dolby Digital
Compressed digital audio, developed by Dolby
Laboratories, which enables multi-channel
encode to create the realistic surround sound.

DTS
Compressed digital audio, developed by Digital
Theater Systems, Inc., which enables multi-
channel like Dolby Digital. As the compression
ratio is lower than for Dolby Digital, it provides
wider dynamic range and better separation.

• While playing an SD card, the playback order

may differ from the one played back using
other SD players.

• This receiver may be unable to play back

some SD cards due to their characteristics or
recording conditions.

• While duplicating SD data into HDD, you

cannot change the playback source or eject
the disc.

Sound adjustments

• While editing the HDD contents or

duplicating SD into the HDD, you cannot
make sound adjustments.

General settings—PSM

• While editing the HDD contents or

duplicating SD into the HDD, you cannot
enter the PSM setting screen.

• When you change the “DAB AF” setting

from “Off” to “On,” the “AF-Regn’l” setting
changes to “AF” if it has been set to “Off.”

• If you change the “Amp Gain” setting from

“High Pwr” to “Low Pwr” while the volume
level is set higher than “Volume 30,” the
receiver automatically changes the volume
level to “Volume 30.”

Other main functions

• If you try to assign a title to a 31st disc,

“Name Full” flashes on the display. Delete
unwanted titles before assignment.

• Titles assigned to discs in the CD changer can

also be shown if you play back the disc in the
receiver.

EN103_122_KD-NX901[E]fb.indd 110

EN103_122_KD-NX901[E]fb.indd 110

05.3.17 2:11:37 PM

05.3.17 2:11:37 PM

Advertising