JVC KD-NX901 - Manual (Page 46)

46
ENGLISH
3
Select a PTY code.
4
Start searching.
Storing your favourite programmes
You can store six favourite programme types.
Preset programme types in the number buttons
(1 to 6):
1
2
Select a PTY code.
Ex.: When “Rock M” is selected
3
Select the preset number (1 – 6) you
want to store into.
Preset number flashes for a while.
4
Repeat steps 2 and 3 to store
other PTY codes into other preset
numbers.
5
Finish the procedure.
Using the standby receptions
TA Standby Reception
TA Standby Reception allows the receiver to
switch temporarily to Traffic Announcement
(TA) from any source other than AM.
The volume changes to the preset TA volume
level (see page 89).
• If the DAB tuner is connected, Standby
Reception also works to search for a DAB
service broadcasting Traffic Announcement.
To activate TA Standby Reception
TP indicator either lights up
or flashes.
• If the TP indicator lights up, TA Standby
Reception is activated.
• If the TP indicator flashes, TA Standby
Reception is not yet activated.
To activate TA Standby Reception, tune in to
another station (or DAB service) providing
the signals. The TP indicator will stop
flashing and remain lit.
To deactivate the TA Standby Reception
TP indicator goes off.
EN42-47_KD-NX901[E]tunerfb.indd 46 EN42-47_KD-NX901[E]tunerfb.indd 46 05.3.17 2:04:39 PM 05.3.17 2:04:39 PM