Important for laser products, English how to forcibly eject a disc, How to reset your unit – JVC KD-NX901 User Manual

Page 2

Advertising
background image

2

ENGLISH

How to forcibly eject a disc

If a disc cannot be recognized by the
receiver or cannot be ejected, ejects the disc
as follows.

• While the source operation screen is

shown...

• If this does not work, try to reset your

receiver.

• Be careful not to drop the disc when it

ejects.

Thank you for purchasing a JVC product.

Please read all instructions carefully before operation, to ensure your complete understanding and to

obtain the best possible performance from the unit.

Warning:

If you need to operate the receiver while
driving, be sure to look ahead carefully or
you may be involved in a traffic accident.

Temperature inside the car....

If you have parked the car for a long time in
hot or cold weather, wait until the temperature
in the car becomes normal before operating the
unit.

For safety....

• Do not raise the volume level too much, as

this will block outside sounds, making driving
dangerous.

• Stop the car before performing any

complicated operations.

For security reasons, a numbered ID card is provided with this receiver, and the same ID number
is imprinted on the receiver’s chassis. Keep the card in a safe place, as it will help the authorities
to identify your receiver if stolen.

Caution

Never try to analyse or retrieve the data
stored in the Hard Disk Drive (HDD).
Otherwise, you may have your warranty
invalid, and be penalized by law.
The manufacturer assumes no liability for
any damage resulting from such conduct as
mentioned above.

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT
2. CAUTION: Do not open the top cover.

There are no user serviceable parts inside
the unit; leave all servicing to qualified
service personnel.

3. CAUTION: Visible and invisible laser

radiation when open and interlock failed or
defeated. Avoid direct exposure to beam.

4. REPRODUCTION OF LABEL: CAUTION

LABEL, PLACED OUTSIDE THE UNIT.

How to reset your unit

This will reset the microcomputer. Your
preset adjustments will also be erased.

EN02-10_KD-NX901[E]fb.indd 2

EN02-10_KD-NX901[E]fb.indd 2

05.3.17 1:59:24 PM

05.3.17 1:59:24 PM

Advertising