JVC KD-NX901 - Manual (Page 8)

8
ENGLISH
Remote controller —
RM-RK230
Main elements and features
The remote controller can operate the playback
sources any time, even when you are using the
Navigation System.
MONITOR CONTROL
1 Monitor control buttons
• Controllable only if your monitor is one
of the JVC monitors—KV-MR9010 or
KV-MH6510.
DVD/RECEIVER CONTROL
2
(standby/on attenuator) button
• Turns on and off the power and also
attenuates the sound.
3 SOURCE button
• Selects the source.
4 BAND button
• Selects the FM/AM/DAB bands.
5 TOP M (menu) button* 1
• Displays the DVD disc menu.
MODE MENU ASPECT
ZOOM ATT
SOURCE
DISC+
DISC–
DVD / RECEIVER CONTROL
MONITOR CONTROL
+10
–10
1 2 3
4 5 6
7 8
0
9
–100
BAND
OSD
MENU TOP M
SETUP
RM-RK230
RETURN
ENTER
DUAL
SHIFT
VOL
2nd VOL
+100
/ TITLE
PRESET
/ TITLE
Installing the lithium coin battery
(CR2025)
Using the remote controller:
• Aim the remote controller directly at the
remote sensor on the unit (see page 10). Make
sure there is no obstacle in between.
• Do not expose the remote sensor to strong
light (direct sunlight or artificial lighting).
Warning:
• Do not install any battery other than
CR2025 or its equivalent; otherwise, it
may explode.
• Store the battery in a place where children
cannot reach to avoid risk of accident.
• To prevent the battery from over-heating,
cracking, or starting a fire:
– Do not recharge, short, disassemble, or
heat the battery or dispose of it in a fire.
– Do not leave the battery with other
metallic materials.
– Do not poke the battery with tweezers or
similar tools.
– Wrap the battery with tape and insulate
when throwing away or saving it.
EN02-10_KD-NX901[E]fb.indd 8 EN02-10_KD-NX901[E]fb.indd 8 05.3.17 1:59:30 PM 05.3.17 1:59:30 PM