JVC KD-LX330R - Manual (Page 16)

16
ENGLISH
Playing a CD
1
Open the loading slot.
The display panel moves down, and the
loading slot appears.
2
Insert a disc into the loading slot.
The unit draws in a CD,
the display panel
moves up, and CD play
starts automatically.
CD OPERATIONS
Total playing time of the
inserted disc Total track number of
the inserted disc
Elapsed playing time Current track
SOURCE
KD-LX330R
SSM
PTY OFF TP/RDS MODE DISP SEL 10 7 8 9 11 12 INT RPT RND LOCAL MONO SCM
PTY TP/RDS
BAND
BAND
The CD indicator lights up.
Notes:
• When a CD is in the loading slot, selecting “CD”
as the source by pressing SOURCE starts CD play.
• When a CD is inserted upside down, the CD
automatically ejects. (“DISC EJECT” appears on
the display.)
• When you play a CD Text, the disc title and
performer appear on the display. Then the current
track title appears on the display, followed by the
track number and elapsed playing time. See also
“Playing a CD Text” (page 18) and “To select the
scroll mode — SCROLL MODE” (page 25).
If a CD Text includes much text information, some
may not appear on the display.
• If you change the source, CD play also stops
(without ejecting the CD).
To stop play and eject the CD
Press OFF/ 0 briefly.
CD play stops, the display panel moves down,
then the CD automatically ejects from the loading
slot.
To move up the display panel, press
¢ or
4 . If no button is pressed, the display
panel will move up in about 5 minutes.
CAUTION: NEVER insert your finger between
the display panel and the unit, as it
may get caught in the unit.
Note:
If the ejected disc is not removed for about 15
seconds, the disc is automatically inserted again into
the loading slot to protect it from dust. (CD play will
not start this time.)
EN16-18.KD-LX330R[E]f 2/5/01, 10:12 AM 16