JVC KD-LX330R - Manual (Page 35)

35
ENGLISH
EXTERNAL COMPONENT OPERATIONS
Playing an external component
When connecting an external component to the
LINE IN plugs on the rear, you can select the
component as the sound source.
1
Select the external component.
Each time you press the
button, the source changes
as described on page 7.
2
Operate the external component.
Note:
For the external component connection, see the
Installation/Connection Manual (separate volume).
Using a subwoofer
By connecting a subwoofer to the SUBWOOFER
OUT plugs on the rear, you can enjoy enhanced
bass sounds and a more realistic theater
atmosphere in your car.
• Refer also to the instructions supplied with your
subwoofer.
When a subwoofer is connected to this unit, select
an appropriate cutoff frequency level for your
subwoofer.
To set the subwoofer cutoff frequency, see “To
select the subwoofer cutoff frequency — WOOFER
FREQ” on page 25.
To adjust the subwoofer output volume, see
“Adjusting the sound” on page 19.
SOURCE
KD-LX330R
SSM
PTY OFF TP/RDS MODE DISP SEL 10 7 8 9 11 12 INT RPT RND LOCAL MONO SCM BAND
TP/RDS PTY
BAND
EN35-43.KD-LX330R[E]f 2/5/01, 10:08 AM 35