JVC KD-LX330R - Manual (Page 8)

8
ENGLISH
To stop searching before a station is received,
press the same button you have pressed for
searching.
To tune in FM stations only with strong signals
1 Press MODE BAND.
“MODE” appears on the lower part of the display,
and the number buttons can work as different
function buttons.
2 Press LOCAL, while “MODE” is still on the display,
so that the LOCAL indicator lights up on the
display.
This function works only while searching FM
stations, including SSM preset (see page 9).
Each time you press the button, the LOCAL
indicator lights up and goes off alternately.
Searching a station manually:
Manual search
1
Select the band.
1 Press SOURCE to select
FM or AM as the source.
2 If necessary, press and
hold MODE BAND to
select the FM band
number (FM1, FM2 or
FM3).
Each time you press and hold the button, the
FM band changes as follows:
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to an
FM broadcast.
Listening to the radio
You can use either automatic searching or manual
searching to tune into a particular station.
Searching a station automatically:
Auto search
1
Select the band.
1 Press SOURCE to select
FM or AM as the source.
2 If necessary, press and
hold MODE BAND to
select the FM band
number (FM1, FM2 or
FM3).
Each time you press and hold the button,
the FM band changes as follows:
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to an
FM broadcast.
2
Start searching a station.
When a station is received, searching stops.
BAND
Selected band appears.
BAND
RADIO BASIC OPERATIONS
SOURCE
KD-LX330R
SSM
PTY OFF TP/RDS MODE DISP SEL 10 7 8 9 11 12 INT RPT RND LOCAL MONO SCM BAND
TP/RDS PTY
BAND
FM1 FM2 FM3
FM1 FM2 FM3
Press ¢ to search
stations of higher frequencies.
Press 4 to search
stations of lower frequencies.
EN07-10.KD-LX330R[E]f 2/5/01, 10:14 AM 8