JVC KD-LX330R - Manual (Page 7)

7
ENGLISH
BASIC OPERATIONS
3
Adjust the volume.
4
Adjust the sound as you want (see
page 19).
To drop the volume in a moment
Press SOURCE for more than 1 second while
listening to any source. “ATT” starts flashing on the
display, and the volume level will drop in a moment.
To resume the previous volume level, press the
button for more than 1 second again.
To turn off the power
Press and hold OFF/ 0 until “SEE YOU” appears
on the display.
Note:
When you use this unit for the first time, set the built-in
clock correctly, see page 22.
To increase the volume.
To decrease the volume.
Volume level meter
Note on display illustrations:
Illustrations will differ from what appears if
“CLOCK DISP” is set to “CLK DISP OFF.” See
page 24.
KD-LX330R
SSM
PTY OFF TP/RDS MODE DISP SEL 10 7 8 9 11 12 INT RPT RND LOCAL MONO SCM
SOURCE
KD-LX330R
BAND OFF BBE
1 2 3
SOURCE
BAND
1
Turn on the power.
The display illuminates and
the control panel and control
dial come out.
2
Select the source.
Each time you press the
button, the source changes
as follows:
= FM = DAB tuner** = CD*
= CD changer** = External component
= AM = (back to the beginning)
* If a CD is not in the loading slot, you cannot
select CD as the source to play.
** Without connecting the CD changer and/or the
DAB tuner, you cannot select it as the source
to play.
To operate the tuner (FM or AM),
see pages 8 – 15.
To operate the CD player,
see pages 16 – 18.
To operate the CD changer,
see pages 32 – 34.
To operate the external component,
see page 35.
To operate the DAB tuner,
see pages 36 – 39.
EN07-10.KD-LX330R[E]f 2/5/01, 10:14 AM 7