JVC KD-AV7000 User Manual

Page 251

Advertising
background image

69

ENGLISH

Ejecting a disc

• If the ejected disc is not removed within 15

seconds, the disc is automatically inserted
again into the loading slot to prevent it from
dust. (Disc will not play this time.)

Displaying the disc text information

• For MP3: If no ID3 tag is recorded, folder

and track names are displayed instead.

Notes on Recordable (R) and Rewritable (RW)
discs

• Use only “finalized” discs.
• For DVD-R/DVD-RW: This unit can play

back only discs recorded in the DVD-Video
format. (Discs recorded in the DVD-VR
format cannot be played.)

• For CD-R/CD-RW: This unit can play back

only audio CD (CD-DA) files if a disc
includes both audio CD (CD-DA) files and
MP3 files.

• This unit can play back multi-session discs;

however, unclosed sessions will be skipped
while playing.

• Some discs may not play back on this unit

because of their disc characteristics, and for
the following causes:
– Discs are dirty or scratched.
– Discs are kept in a place where temperature

becomes extremely high.

– Moisture condensation on the lens inside

the unit.

– The pickup lens inside the unit is dirty.
– Discs on which the files are written with

“Packet Write” method.

– There are improper recording conditions

(missing data, etc.) or media conditions
(stain, scratch, warp, etc.)

• Rewritable discs may require a longer readout

time since the reflectance of rewritable discs
is lower than that of regular DVD/CDs.

• Do not use following discs:

– Discs with stickers, labels, or protective

seal stuck to the surface.

– Discs on which labels can be directly

printed by an ink jet printer.

Using these discs under high temperatures or
high humidity may cause malfunctions or
damage to discs.

• The speaker/signal indicators appear in the

following cases (only for DVD/CD):
– When a different type of the digital signal is

detected, or

– When you start playback or resume

playback from pause.

– The speaker indicators—frames of “L,”

“C,” “R,” “LS,” and “RS” light up, when
the corresponding speakers are set to
“LARGE” or “SMALL” (see page 51).
Sounds come out of the speakers whose
speaker indicators is lit on the display.

– The

indicator lights up when

“SUBWOOFER” is set to “YES” (see page
51).

– The signal indicators changes its color from

white to yellow to indicate the incoming
signals—L (front left) / R (front right) / C
(center) / LFE (low frequency effect) / LS
(left surround) / RS (right surround) / S
(monaural surround).

Changing the source

• If you change the source, playback also stops

(without ejecting the disc).
Next time you select “DISC” for the playback
source, disc play will start automatically.

Stopping play

• Except for MP3 discs: This unit can

remember the end point (until the disc is
ejected), and when you start playback again,
playback begins from where it has been
stopped (Resume play).

• For MP3 discs: This unit can remember the

last playing track (until the disc is ejected),
and when you start playback again, playback
begins from the beginning of the same track.

Signal indicators

Speaker indicators

SUBWFR

SUBWFR

67-77_KD-AV7005[U]f.p65

10/1/04, 12:13 PM

69

Advertising