JVC DR-M150SEK - Manual (Page 17)

Masterpage:Right0
EN
17
Filename [M150SEK_05Name.fm]
INITIAL SETTINGS
Auto Channel Set/Auto Clock Set
1
Press A on the unit or DVD A on the remote control to turn
on the unit. The AUTO SEARCH display appears on the TV
screen.
2
Press selection keys to
select
AAUTO
SEARCH B, then press
ENTER.
● Auto Channel Set for
digital terrestrial
broadcast (DVB-T) is
performed and the
received digital
terrestrial broadcast
(DVB-T) channels are
stored automatically.
● When Auto Channel Set
is completed, a
broadcast receiving
screen appears.
ATTENTION:
AAUTOB blinks on the front
display panel; do NOT
press any button on the unit
or remote control until the
front display panel shows
clock time,
A1B or AcB as illustrated on page 18.
NOTES:
● If there is a power cut, or if you press A or SET UP while AAuto
Set Up B is in progress, AAuto Set UpB will be interrupted. Be sure
to turn off the unit power once and try again from step 1.
● Auto Clock Set may not function properly depending on the
reception condition.
Auto Set Up
After the A button on the unit (or DVD A on the remote
control) is pressed for the first time to turn on the unit, the Auto
Set Up function sets the tuner channels and clock automatically.
Before starting, make sure of the following:
● The TV aerial cable should be connected to the unit.
● The unit’s mains power cord should be connected to a mains
outlet.
● Turn on the TV and select an input mode such as EXT1.
● Slide the TV/DVD switch to DVD.
(FGDE)
ENTER
SET UP
DVD A
DVD TV
RAM/RW
1
Selection Keys
INITIAL SET UP
AUTO SEARCH
INITIAL SET UP / CHANNEL SET
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
EXIT
OK
SELECT
SET UP
radio
BBC ONE Scot
BBC TWO Scot
BBC THREE
BBC NEWS 24
BBCi
CBBC Channnel
BBC R Scotland
BBC R n Gaidheal
0% 100%
Auto Search
Press to Cancel search ...
CANCEL
UHF CH:65
Programs
ATTENTION:
Once you have performed
AAuto Set UpB, even if the unit’s
memory backup has expired, all the stored stations and their
channel numbers remain in the unit’s memory and the unit will
not perform
AAuto Set UpB again. Perform clock set manually if
the clock has not been set correctly by AAuto Set UpB. (A pg. 66)
If you have moved to a different area, perform each setting as
required.
● Tuner setting (A pg. 64)
● Clock setting (A pg. 66)
If a new station starts broadcasting in your area, perform tuner
setting. (A pg. 64)
After AAuto Set UpB is completed, perform AMonitor SetB on
page 19.
M150SEK_00.book Page 17 Wednesday, June 15, 2005 4:04 PM