JVC DR-M150SEK - Manual (Page 40)

Filename [M150SEK_07Timer Recording.fm]
Masterpage:Left+
40
EN
TIMER RECORDING
To Timer Record The Programme With The
Programmed Disc
1
Load a programmed disc.
2
Press DVD A to turn off the power.
● appears on the front display panel, and the unit enters
into timer standby mode.
● To disengage the timer mode, press DVD A again.
NOTES:
● On-Disc Timer Programming is not possible on a DVD-R or DVD-
RW (Video mode) disc.
● The information of a programme recorded with On-Disc Timer
Programming is not stored in the library.
● The play list is not created for the programmes recorded with On-
Disc Timer Programming.
● Programmes recorded with On-Disc Timer Programming cannot
be edited or protected.
● On-Disc Timer Programmed discs cannot be used for other
recordings other than On-Disc Timer Programming.
● On-Disc Timer Programmed discs cannot be used on units from
other manufacturers.
● The beginning of a programme may not be recorded. In addition,
if the 1st programme’s recording stop time and the 2nd
programme’s recording start time is the same, the ending of the
1st programme may not be recorded.
● If there is a power outage while recording, the recordings when
the power outage occurs are not guaranteed.
How Discs Are Overwritten
NOTE:
On-Disc Timer Programming may not always work as these
examples.
12/6 12/3
12/5 12/4
12/10 12/7
12/9 12/8
(Example 1)
To record a 1-hour serial drama every Friday in SP mode
Blank 2nd 1st
2nd 3rd 4th 3rd
The first programme is
overwritten by the third. The second programme is
overwritten by the fourth.
(Example 2)
To record a 15-minutes serial drama every morning in XP
mode
(Example 3)
To record a 90-minutes serial drama every Sunday in SP
mode
Areas treated as blank
cannot be played back
even if they contain
recorded material.
4th 1st
3rd 2nd
8th 5th
7th 6th
Blank
Blank
Blank
1st
2nd
3rd
1st
M150SEK_00.book Page 40 Wednesday, June 15, 2005 4:04 PM