JVC DR-M150SEK - Manual (Page 62)

Filename [M150SEK_10Subsidiary.fm]
Masterpage:Left+
62
EN
SUBSIDIARY SETTINGS
Remote Control 1/2/3/4 Code Switching
The remote control is capable of controlling four JVC video units
independently. Each of the units can respond to one of the four
codes (1, 2, 3 or 4). The remote control is preset to send code 3
signals because your unit is initially set to respond to code 3
signals. You can easily modify your unit to respond to code 1, 2 or
4 signals.
● Keep pressing SET UP down during step 1.
1
Press the number key A1B for 1, A2B for 2, A3B for 3 or A4B for 4 to
change the remote control code, then press ENTER.
2
Press A on the unit to turn off the unit.
3
Press I on the unit for over 5 seconds while the unit is turned
off. The code currently set appears on the front display panel.
4
Press o on the remote control to change the unit’s code. The
code currently set on the remote control blinks on the front
display panel for approximately 5 seconds, and is applied to the
unit.
Your Remote can operate the basic functions of your TV set. In
addition to JVC TVs, other manufacturer’s TVs can also be
controlled.
IMPORTANT:
Although the supplied Remote unit is compatible with JVC
televisions, as well as many other models, it may not work with
your TV, or in some instances, may have limited function capability.
8 Set the TV brand code.
1
Keep pressing SET UP down during step 2.
2
Enter your TV’s brand code using the number keys, then press
ENTER. (A pg. 63)
3
Press TV A on the unit’s Remote to turn on the TV and try
operations.
● Once you have set the Remote to operate the TV, you do not
have to repeat this step until you replace your Remote’s
batteries.
● Some brands of TVs have more than one code. If the TV does
not function with one code, try entering another.
8 Operate the TV.
1
Press the corresponding button: TV A, TV/VIDEO, PR +/–,
TV 8 +/–, number keys.
● For some brands of TVs, you must press ENTER after having
pressed the number keys.
Remote Control Functions
ENTER
SET UP
1-4
o
RAM/RW
I A
TV Multi-Brand Remote Control
● Slide the TV/DVD switch to TV.
PR +/-
SET UP
TV 8 +/-
ENTER
TV A
TV/VIDEO
0-9
DVD TV
M150SEK_00.book Page 62 Wednesday, June 15, 2005 4:04 PM