Mode setting, Cv-m40, 1. sw1 switch on the rear panel – JAI CV-M40 User Manual
Page 15
CV-M40
15
7-1. SW1 switch on the rear panel
7. Mode setting
Note : The above switches are set at OFF position by factory pre-set.
7-1-1. Shutter speed (SW1-1, SW1-2, SW1-3)
SW1-1, SW1-2 and SW1-3 switches are effective only when the SW1-8 switch is set at OFF position.
Exposing the CCD to direct or scattered bright light or to AC powered light, the following may appear.
Strong smear and/or blooming.
Noticeable flicker in the picture.
1)
2)
Shutter
speed
Switch setting (OFF : /ON : )
SW1-1
SW1-2
SW1-3
1/125
1/250
1/500
1/1,000
1/2,000
1/4,000
1/8,000
1/12,000
SW
no.
Switch function
Setting mode
OFF
ON
OFF
ON
OFF
ON
OFF
ON
Shutter speed
Refer to "6-1-1.Shutter speed"
Binning mode
Ext. trigger/readout
mode
Refer to
"6-1-3. Ext. trigger/readout mode"
Partial scan mode
1
2
3
4
5
6
7
8
RS 232C interface
OFF ON
CAUTION