Juniper Networks EX8208 - Manual (Page 156)

Parts Inventory (Packing List) for an EX8208 Switch
The switch shipment includes a packing list. Check the parts you receive in the switch
shipping crate against the items on the packing list. The packing list specifies the part
number and description of each part in your order. The parts shipped depend on the
configuration you order. See “EX8208 Switch Configurations” on page 6 for more
information.
If any part on the packing list is missing, contact your customer service representative or
contact Juniper customer care from within the U.S. or Canada by telephone at
1–800–638–8296. For international-dial or direct-dial options in countries without
toll-free numbers, see
http://www.juniper.net/support/requesting-support.html .
NOTE: All line cards ordered are shipped separately. Line cards are not listed on the
switch’s packing list.
NOTE: The base configuration is available only with AC power supplies. The redundant
configuration ships with either AC or DC power supplies.
Table 52 on page 130 lists the parts and their quantities in the packing list for a base
configuration and a redundant configuration switch.
Table 52: Parts List for Different EX8208 Switch Configurations
Redundant Configuration Quantity Base Configuration Quantity Component
1 1 Chassis, including the backplane and
front-mounting brackets
2 1 Switch Fabric and Routing Engine (SRE)
module
1 1 Switch Fabric (SF) module
6 AC or 4 DC 2 AC Power supplies
6 (1 per AC power supply) 2 (1 per power supply) Power supply cords
1 1 Fan tray
• Line card cover panels: 8 • Line card cover panels: 8
• SRE module cover panel: 1
• Power supply cover panels: 4
Cover panels for slots without installed
components
Table 53 on page 131 lists the parts contained in the accessory box. The same accessories
ship with both configurations of the switch.
Copyright © 2010, Juniper Networks, Inc. 130
Complete Hardware Guide for EX8208 Ethernet Switches