Live memory playback on hdd/dvd deck, Live memory playback, Recording/playback status display – JVC SR-DVM700ER User Manual

Page 33

Advertising
background image

Masterpage:Right0

EN

33

Filename [DVM700ER_09Live Memory.fm]

Page 33Wednesday, 20 September 2006 10:03

LIVE MEMORY PLAYBACK ON HDD/DVD DECK

This unit records pictures onto the hard disk and DVD-RAM disc,
instead of video tapes, then plays back the pictures recorded on
the disc. This makes it possible to achieve high-speed writing and
read-out that has not been possible with conventional VCRs,
enabling recording and playback simultaneously.

It is called

ALive Memory PlaybackB to start playback of the

programme being recorded, with a time-lag between a recording
point and a playback point, as shown in the figure below.

Not only can this unit play back a programme previously recorded
while recording another programme, but the unit also allows you to
play back from the beginning of a programme while continuing to
record the same programme.

Recording/playback Status Display

NOTES:

Live Memory Playback could be performed approximately 30
seconds after recording has started on the DVD-RAM disc.
However, for HDD, Live Memory Playback is possible right after
recording has started.

Although high-speed search up to approximately 30 seconds
before the current recording point is possible during Live Memory
Playback, once the current recording point is reached, the unit
resumes normal playback and maintains a delay of approximately
30 seconds so that recording and playback can continue.

Playback may be paused for a moment during Live Memory
Playback, which does not interfere with recording.

Live Memory Playback cannot be performed while recording the
source from DV input. (

A pg. 48, ADV Dubbing (HDD & DVD

Deck Only)

B)

When EE CHECK is pressed to display the picture currently
being recorded, the picture size may not be correct.

Press

o or EE to stop Live Memory Playback.

Live Memory Playback cannot be performed while the DVD deck
is recording as temporary recording on HDD stops during
recording on DVD.

Live Memory Playback

Turn on the unit.

Turn on the TV and select the AV mode.

Slide the TV/DVD switch to DVD.

Press DV/HDD/DVD on the unit repeatedly to select the HDD
or DVD deck.

Playback
(High-speed read-out)

Recording

(High-speed writing)

High-speed spin

Current recording position

(Recording point)

Recording start point

Current playback point

(Live Memory Playback)

0

30 min.

Playback
continues

Recording
continues

Currently elapsed recording time

1 hour

ON SCREEN

NAVIGATION

EE CHECK

o

R

DVD

TV

Live Memory Playback status can be checked by
pressing ON SCREEN to display the bar meter on
the superimpose display. The current status is
superimposed on the TV screen. (

A

pg. 14,

AWhen

using Live Memory playback

B)

Press NAVIGATION to display Library Database
Navigation menu, then choose a programme to play
back. (

A

pg. 36)

EE

DVM700ER_00.book Page 33 Wednesday, September 20, 2006 10:03 AM

Advertising