JVC SR-DVM700ER - Manual (Page 39)

Masterpage:Right+
EN
39
Filename [DVM700ER_10Navigation.fm]
NAVIGATION ON HDD/DVD DECK
Page 39Wednesday, 20 September 2006 10:03
Divide Title (HDD deck only)
You can divide titles that are recorded continuously.
1
Press EDIT. The Editing screen appears.
2
Press selection keys to select ADIVIDEB, then press ENTER.
3
Press selection keys to select a title to divide, then press
ENTER.
4
Press I to start playback. Press O or N to locate a point to
divide, then press W.
5
Confirm the arrow is on ADIVIDEB, then press ENTER.
● The first picture (start) of the newly created title appears in the
bottom right window.
● Select APREVIEWB, then press ENTER. The first several
seconds of the newly created title is played back, then the
playback pauses at the dividing point.
● To undo the division, press selection keys to select ARETRYB,
then press ENTER. Repeat the above procedure to locate
another point to divide.
6
Press selection keys to select AOKB, then press ENTER.
7
Press selection keys to select ADIVIDEB, then press ENTER.
● Select ACANCELB, then press ENTER to return to the previous
screen.
8
Press EDIT to return to the normal screen.
NOTES:
● There may be a discrepancy of several seconds between the
scene you intend to edit, and the scene which is actually edited.
● It is not possible to divide titles that are used in the play list.
Modify Chapter
(HDD, DVD-RAM & DVD-R/RW (VR mode) only)
You can create and delete chapter marks in titles.
1
Perform steps 1 - 4 of AModify IndexB (A pg. 37) before
continuing.
2
Press selection keys to select ACHAPTERB, then press
ENTER.
3
Press I to start playback.
Press O or N, then press
W at the positions you want to
mark.
4
Press selection keys to select
AMARKB, then press ENTER.
● To undo the marking, press
selection keys to select
ARETRYB, then press ENTER.
● Repeat the above steps 3 and 4 to locate another point to mark.
5
Press S or T to select one chapter you want to delete,
press selection keys to select AERASEB, then press ENTER.
● To undo the deletion, press selection keys to select ARETRYB,
then press ENTER.
6
Press EDIT to return to the normal screen.
NOTE:
There may be a discrepancy of several seconds between the
scene you intend to edit, and the scene which is actually edited.
0 : 07 : 01
01 00 : 00 : 00 02 00 : 05 : 30 03 00 : 07 : 00 04 00 : 30 : 00
MARK
EDITING > MODIFY CHAPTER
ERASE RETRY RETURN
03/10
DVM700ER_00.book Page 39 Wednesday, September 20, 2006 10:03 AM