JVC RK-LP55U - Manual (Page 3)

IT
ALIANO
ESP
AÑOL
FRANÇAIS
DEUTSCH
ENGLISH
E-3
FEATURES
● Setup Menu function for easy camera
preparation
The RM-LP55’s easy-to-use Setup Menu
function lets you make all necessary camera
settings while referring to the remote’s LCD
panel.
● Easy-to-see LCD indications
Operation status can be displayed on the LCD
for at-a-glance checking of current camera
settings. The display is backlit so indications
are clear and easy to read even in the dark.
● AScene FileB function
You can store two different sets of setting data
in the remote control’s memory which can be
called up whenever necessary and applied
directly to the connected camera.
PRECAUTIONS
o Safety precautions
● Be sure that no inflammable materials, liquids,
or metal objects are introduced into the
RM-LP55. This may damage the internal
circuitry and lead to failure.
● Never use the RM-LP55 if it has been modified
or the cover has been removed.
● If the RM-LP55 behaves abnormally (emits
strange sounds, odors, or smoke), cut off the
power immediately and contact your nearest
JVC-authorized service agent.
o Handling the unit
● Operating environment
Do not install or use the camera in the following
locations.
● Places exposed to rain or water
● Places containing vapor or oil soot, such as
kitchens
● Places exceeding the operating ambient
temperature range (0° to 40°)
● Places where corrosive gases are generated
● Places nearby radiation or X-rays as well as
sources of strong radio waves or magnetism
● Places subject to vibration
● Places with excessive dust
● Ambient temperature:
Observe the ambient temperature range as
described in the Specifications on page 21.
● External care of the RM-LP55:
Gently wipe off dust with a soft dry cloth (such
as flannel). If the unit is extremely dirty, dip a
soft cloth into a detergent solution diluted with
water, wring it thoroughly, then wipe the dirt off.
Dry the unit with a dry cloth. Do not use a rag
treated with chemicals or allow volatile liquids
such as benzine, thinner, alcohol, etc., to come
in contact with the RM-LP55. This may mar the
finish or the damage the coating.
● Where there are strong electromagnetic waves
or magnetism, for example near a radio or TV
transmitter, transformer, motor, etc., the picture
may contain noise and the colors may be
incorrect.
RM-LP55_U_E.book Page 3 Monday, July 25, 2005 2:57 PM