JVC RK-LP55U - Manual (Page 7)

IT
ALIANO
ESP
AÑOL
FRANÇAIS
DEUTSCH
ENGLISH
E-7
● The setup menu can be accessed via the
MENU button and displayed on the LCD panel.
Setting items can be selected and set as
required.
1.
Press either MENU button B ( or ) to
select desired Menu item on the LCD.
2.
Setting procedure varies for each item. To set
data, follow the procedure for each item as
described in the following sections.
● A 10-item (1 to 10) is available at the
maximum. (The features that are not available
on the camera will not be displayed)
● Press MENU B to select the menu.
● After maximum menu item number, there are
no further indications (nothing will be displayed
on the LCD.
o CAMERA MODE (CAM/BARS/NEGA)
● Selects the camera’s video output.
1. Select A1: CAM MODEB using MENU button B.
2. Select output mode, CAM (camera output),
BARS (color bars signal) or NEGA (negative
signal) using FUNC2 button D.
o CONTOUR MODE (ON/OFF), CONTOUR
LEVEL CONTROLS
● Set to ON to correct contour or to OFF when
contour correction is not required. When set to
ON, the contour correction level can be
adjusted within a range of –99 to +99.
1.
Select A2: CONTOURB using MENU button B.
2. Set ON or OFF using FUNC2 button D.
3. When set to ON, the current contour level is
indicated and the contour level can be adjusted
using FUNC1 button C.
● If the button is held depressed, the level will
vary in 10 steps.
OPERATIONS WITH THE SETUP MENU
Menu No. Display
1
2
3
4
5
6
7
8
9
10
1: CAM MODE
2: CONTOUR
3: SC FINE COARSE
4: H.PHASE
5: GAMMA
6: IRIS DETECT
7: TITLE
8: TITLE SET
9: RANDOM TRIGGER
10: HI-RESO
W.PAINT GAIN SHUTTER IRIS MANU OPERATE
FUNC1 MENU
ENTER
/SET FUNC2
B D C
MENU
Press to advance to the next item.
Press to go back to the previous item.
1 : CAM MODE
CAM
Output mode indication
FUNC2
Select output
mode.
2 : CONTOUR
2 : CONTOUR
ON 0
OFF
Mode indication
Level
FUNC1 FUNC2
To adjust contour
level in the + direction.
To adjust contour
level in the – direction.
Set ON or OFF.
RM-LP55_U_E.book Page 7 Monday, July 25, 2005 2:57 PM