JVC XV-NA7SL - Manual (Page 62)

Changing the initial settings
Changing the initial settings
60
XV-NA7SL/LET0212-004A/English
This menu allows you to select desired options concerning with audio sound.
Digital output signal chart
AUDIO menu
Menu item Setting options Notes/examples
DIGITAL AUDIO OUTPUT
To connect the unit’s digital
output to an external device
equipped with a digital input,
this item must be set correctly.
See the table following for
details about the relation
between the setting and
output signals.
• PCM ONLY
Should be selected when you connect the DIGITAL
OUT jack of the unit to the linear PCM digital input of
other audio equipment.
• When playing a DVD VIDEO or
Audio CD disc with DTS, use a DTS
decoder to get correct signals from
your speakers.
• With some DVD VIDEO discs that
are not fully copy-protected, a 20
or 24 bit digital signal may be
output.
• A signal recorded with the 88.2 kHz
or higher sampling frequency
cannot be output from the DIGITAL
OUT jack, regardless of the setting
(due to copy protection issues).
• DOLBY DIGITAL/PCM
Should be selected when you connect the digital
input of a Dolby Digital decoder or an amplifier with
a built-in Dolby Digital decoder.
When this option is selected, playing back a disc
recorded by the DTS or MPEG Multichannel format
outputs a linear PCM digital signal.
• STREAM/PCM
Should be selected when you connect the digital
input of an amplifier with a built-in DTS, MPEG
Multichannel or Dolby Digital decoder, or the stand-
alone unit of such a decoder.
Disc type
Output
PCM ONLY DOLBY DIGITAL/PCM STREAM/PCM
DVD with 48/44.1 kHz, 16/20/24
bit linear PCM
48/44.1 kHz,16 bit, stereo linear PCM
DVD with 192/176.4/96/88.2
kHz, 16/22/24 bit linear PCM
No output
DVD with DTS 48 kHz, 16 bit, stereo linear PCM DTS bitstream
DVD with Dolby Digital 48 kHz, 16 bit, stereo linear PCM Dolby Digital bitstream
DVD with MPEG Multichannel 48 kHz, 16 bit, stereo linear PCM MPEG bitstream
Audio CD/Video CD/SVCD 44.1 kHz,16 bit, stereo linear PCM
Audio CD with DTS 44.1 kHz, 16 bit, stereo linear PCM DTS bitstream
CD-R/RW with MP3 Linear PCM
Menu item Setting options Notes/examples
ANALOG OUT
To play back a DVD VIDEO
disc recorded with surround
multichannel audio correctly,
this setting must be properly
made according to your audio
system.
• 2-CH DOLBY SURROUND
Should be selected when you enjoy multichannel
surround audio by connecting the unit’s AUDIO OUT
jacks to a surround decoder.
• This function does not work when
the 3D PHONIC function is
activated (see page 41).
• [2-CH DOLBY SURROUND] and
[2-CH STEREO] settings affect only
the output signal from the AUDIO
OUT jacks when playing back a
DVD VIDEO disc recorded with
surround multichannel audio.
• Some DVD AUDIO discs prohibit
the 2-channel down-mix. For such
a disc, you cannot get the down-
mixed signal even if you set
[ANALOG OUT] to [2-DOLBY
SURROUND] or [2-CH STEREO].
• 2-CH STEREO
Should be selected when you enjoy conventional 2-
channel stereo audio by connecting the unit’s AUDIO
OUT jacks to a stereo amplifier/receiver or television
set, or when you duplicate audio of a DVD VIDEO
disc recorded with surround audio to your MD,
cassette, etc.
• MULTI CHANNEL
When you enjoy multichannel surround audio by
connecting the unit’s 5.1-channel audio outputs to an
amplifier equipped with 5.1-channel inputs.
SELECT
ENTER
USE 5∞23 TO SELECT, USE ENTER TO CONFIRM
TO EXIT, PRESS CHOICE.
DIGITAL AUDIO OUTPUT STREAM/PCM
ANALOG OUT MULTI CHANNEL
D. RANGE COMPRESSION AUTO
AUDIO
XV-NA7SL(B).book Page 60 Wednesday, July 31, 2002 1:00 PM