JVC KW-NT1 - Manual (Page 57)

57
ENGLISH
Settings for the disc playback
Initial: Underlined
Disc Setup items Selectable settings
Menu Language Select the initial disc menu language; Initial English (
☞ also page 76).
Audio Language Select the initial audio language; Initial English (
☞ also page 76).
Subtitle Language Select the initial subtitle language or erase the subtitle (Off); Initial Off (
☞
also page 76).
Video Output Format Select the color system of the external monitor.
NTSC, PAL
• This setting is valid only to the external monitor connected.
Monitor Type
16:9 4:3LB
4:3PS
Select the monitor type to watch a wide screen picture on the external monitor.
16:9 : Select when the aspect ratio of the external monitor is 16:9.
4:3LB (Letterbox)/4:3PS (Pan Scan): Select when the aspect ratio of the
external monitor is 4:3.
• Refer to the illustrations on the left to see how the pictures are shown on the
screen.
D. Range Compres. You can enjoy a powerful sound at a low volume level while playing Dolby
Digital software.
Auto : Select to apply the effect to multi-channel encoded software.
On : Select to always use this function.
D. Audio Output Select the signal format emitted through the DIGITAL OUT (optical) terminal.
(
☞ also page 75)
Stream : Select this when connecting an amplifier or a decoder compatible
with Dolby Digital or MPEG Audio.
Dolby D : Select this when connecting an amplifier or a decoder compatible
with Dolby Digital.
PCM : Select this when connecting an amplifier or a decoder incompatible with
Dolby Digital or MPEG Audio, or when connecting to a recording device.
EN_KW-NT1[J]f.indb 57 EN_KW-NT1[J]f.indb 57 09.3.24 6:20:00 PM 09.3.24 6:20:00 PM