JVC KW-NT1 - Manual (Page 90)

ENGLISH
90
Symptoms Remedies/Causes
Navigation
Navigation voice cannot be heard from the
speakers. Guidance volume level is set to the minimum level. Adjust
it to the optimum level. (
☞ page 40)
The voice guidance does not come out from the
speaker on the driver’s side. Change the <Output> setting. (
☞ page 43)
Navigation guidance is sometimes incorrect. Reversing signal lead is not connected. Connect them
correctly (
☞Installation/Connection Manual—separate
volume).
A POI found using <POI Name> in the
<Destination Menu> is not within the
selected city/state. This is not a malfunction. The System may also search
areas around the selected city/state.
The current position displayed on the map
remains wrong for more than 30 minutes. Check the connection of the GPS antenna.
“Check GPS Antenna” Check the connection of the GPS antenna.
“Acquiring GPS Signal” • Acquiring GPS signals. Wait until signal reception is
completed.
• GPS signals cannot be received. Move to the place where
the System receives the GPS signals.
“Route calculation failed.” Failed to calculate the route. The destination/via point is
too far from any road. Select another destination/via point
where is close to a road.
“Route calculation is aborted because
destination is too far.” The destination/via point is too far from the current
position. Select another destination/via point where is
nearer to the current position.
“Specified destination is not found.” Valid information is not found in the database. Search for
another place. Press [
] and search again with
different conditions (such as different category or place).
“Selected coordinates are out of map area.
Please input again.” The coordinates you have entered are not available. Press
[OK] and input the coordinates again.
Troubleshooting
EN_KW-NT1[J]f.indb 90 EN_KW-NT1[J]f.indb 90 09.3.24 6:20:43 PM 09.3.24 6:20:43 PM