JVC KW-NT1 - Manual (Page 94)

ENGLISH
94
Troubleshooting
Symptoms Remedies/Causes
AV-IN/Front AV-IN
“No Signal” • Turn on the video component if it is not on.
• Connect the video component correctly.
• Check whether <Front AV Input> or <AV Input>
setting is correct. (
☞ page 69)
Bluetooth
Bluetooth cellular phone does not detect the
unit. This unit can be connected with one Bluetooth cellular
phone at a time.
While connected to a device, this unit cannot be detected
from another device. Disconnect currently connected
device and search again.
The unit does not detect the Bluetooth device. Check the Bluetooth setting of the device.
Echo or noise occurs. Adjust the microphone unit position.
Phone sound quality is poor. • Reduce the distance between the unit and the
Bluetooth cellular phone.
• Move the car to place where you can get a better signal
reception.
Rear view camera
The rear view screen is not displayed when the
gear is shifted to the reverse (R) position. • Check <Camera Input> setting. (
☞ page 86)
• Check the connection.
“No Signal” Check the connection.
EN_KW-NT1[J]f.indb 94 EN_KW-NT1[J]f.indb 94 09.3.24 6:20:48 PM 09.3.24 6:20:48 PM