JVC KW-NT1 - Manual (Page 81)

ENGLISH
81
Phone number (if acquired)
To connect a registered cellular phone
1
2
3
Select the device you want to connect.
“Connected” appears. Press [OK] to confirm the
operation.
Receiving a call
When a call comes in...
When <Auto Answer/Reject> is set to
<Answer>
The unit answers the incoming call automatically.
(
☞ page 79)
5
6 Operate the Bluetooth cellular phone to
connect.
“Connected” appears. Press [OK] to confirm the
operation.
Now connection is established and you can use the
cellular phone through the unit.
The cellular phone remains registered even
after you disconnect the cellular phone. Use
<Connection> (or activate <Auto Connect>)
to connect the same cellular phone from next time.
(
☞ page 79)
Cancel
Registered devices
PIN code (initial: 0000)
EN_KW-NT1[J]f.indb 81 EN_KW-NT1[J]f.indb 81 09.3.24 6:20:32 PM 09.3.24 6:20:32 PM