JVC KW-NT1 - Manual (Page 80)

80
ENGLISH
To check the connection status of a
Bluetooth cellular phone
Blue: Connected
White: Not connected
To connect a Bluetooth cellular phone for
the first time
When you connect a Bluetooth cellular phone to the
unit for the first time, make pairing between the unit
and the cellular phone. Pairing allows Bluetooth cellular
phone to communicate each other.
• Once the connection is established, it is registered in
the unit even if you reset the unit. Up to 5 devices can
be registered in total.
• Only one Bluetooth cellular phone can be connected
at a time.
• To use the Bluetooth function, you need to turn on
Bluetooth function of the cellular phone.
Connecting a Bluetooth cellular phone
PIN code (initial: 0000)
1
Operate the Bluetooth cellular phone to turn
on its Bluetooth function.
2
3
Change the PIN code.
• If you skip changing PIN code, go to step 4.
4
Using Bluetooth® cellular phone
When a call comes in/making a call
On map screen:
The cellular phone control bars appear.
On AV screen:
AV source is turned off.
• AV source is turned on when ending the call or
stopping ringing.
EN_KW-NT1[J]f.indb 80 EN_KW-NT1[J]f.indb 80 09.3.24 6:20:31 PM 09.3.24 6:20:31 PM