JVC CA-UXQ1S - Manual (Page 27)

I
24
English
Recording Sound
NOTE
• The recorded sound level is automatically adjusted.
• The CD rotates at high speed during high speed
recording. Therefore, depending on the condition
of the CD, the sound may be recorded
improperly and affected by noise. If the sound is
not recorded properly, select normal speed
recording.
• The remaining time for recording differs
depending on the selected MDLP mode.
• You cannot record sound while the repeat
playback function is on. Starting the recording
function automatically cancels repeat playback.
Press .
Before proceeding to step 6 on page
23, start playback of the track you
want to record.
• Pressing in step 6 returns playback to
the beginning of the track, and only that
track is recorded.
• When you select high speed recording, the
speed used is ×4.
Before proceeding to step 6 on page
23, select the starting track number
with
or .
• When you select high speed recording for
recording from the selected track, the speed
used is ×4.
Before proceeding to step 5 on page
23, program the tracks you want to
record (
page 18).
• Select normal speed recording ( step 5
on page 23).
When you select high speed recording and
proceed to step 6, "CANNOT REC × 1 REC
ONLY" appears in the display window and
recording does not start.
Press .
• Each time you press , the display
toggles as follows.
Quitting Recording
Recording Only One Track
from a CD
Recording the Second or
Subsequent Track to the Last
Track from a CD
Program Recording from a CD
Changing the display in the display
window during recording
Clock display
Recording CD track number
Remaining CD
playback time of
the track
Remaining MD recording time
Recording CD track number
Recording MD track
number
Recording MD group
number
(When tracks have
not been recorded in
a group, " - -"
appears.)
UX-Q1[UB]-09.fm 24 ページ ２００４年７月２９日 木曜日 午前１０時９分