JVC CA-UXQ1S - Manual (Page 30)

27
Recording Sound to Cassette Tapes
Main unit
Remote control
NOTE
• The sound input level during recording is automati-
cally adjusted.
• When you record tracks from a CD or MD, a 4-
second blank is inserted between tracks in the
recording. You can record tracks with no blank
time. (
page 28)
CAUTION
• It may be unlawful to record or playback
copyright material without the consent of the
copyright owner.
• Do not use long cassette tapes such as C-120 or
C-150. Long cassette tapes are thin and stretch
easily, and may become tangled in the inner part
of the main unit.
• Since this product is not compatible with TYPE II
and TYPE IV cassette tapes, do not use these
types of cassette tapes. This product does not
meet the specifications for these tapes, so sound
is not properly recorded to these types of cas-
sette tapes. You cannot obtain proper playback
sound.
• Write protect tags are attached to a cassette
tape for preventing the erasing of recorded
sound. They enable you to avoid losing impor-
tant recordings because once you snap off the
write protect tags, you cannot record to the cas-
sette tape or erase recorded material.
• When you want to use the cassette tape for
recording again, cover the tag holes with adhe-
sive tape.
1
Insert a cassette tape for record-
ing.
• Before inserting the cassette tape, wind the
tape past the leader part of the cassette
tape.
2
Press to select the reverse
mode.
• Each time you press , the display
toggles as follows.
3
Select a sound source for recording.
4
Press on the main unit.
Preventing recorded sound from
being erased
Sound source Operation
CD
Press , and then press .
(The CD is stopped.)
MD
Press , and then press .
(The MD is stopped.)
Radio broad-
cast Select the radio station whose broad-
cast you want to record (
page 14).
Sound from
other equip-
ment (AUX) Press repeatedly to select AUX,
and prepare playback on the other
equipment (
page 22).
Write protect
tag for side A Write protect
tag for side B
Magnetic tape
(recordable part)
Leader tape (unrecordable part)
: For one-way recording on either side.
: For one return recording on both sides.
: Pressing automatically starts
one return recording on both sides.
UX-Q1[UB]-09.fm 27 ページ ２００４年８月５日 木曜日 午前１０時２４分