JVC CA-UXQ1S - Manual (Page 28)

25
(Continued)
Recording Sound to MDs
• It may be unlawful to record or playback
copyright material without the consent of the
copyright owner.
• You can record tracks having different MDLP
modes onto a single MD.
• You cannot use the monaural extended record-
ing function with this product.
CAUTION
• You cannot play back tracks recorded in LP2 or
LP4 with audio equipment that is not compatible
with MDLP. When you attempt playback, "LP: "
appears in front of the track title, and the main unit
does not produce any sound. When you play back
tracks recorded in LP2 or LP4 with audio equip-
ment that is compatible with MDLP, "LP: " does not
appear.
To activate or cancel the "LP: " indicator, press
. ( page 25)
• You can record up to 254 tracks to an MD. If you
try to record 255 or more tracks, "DISC FULL"
appears.
• When you use a partially-recorded MD, this
product searches for the blank portion and
records the new tracks to that portion.
Unlike cassette tape recording, you cannot
record over old tracks on an MD.
• Changing in sound volume and quality on this
product during recording does not affect the
recorded sound.
• Sound from an audio CD is recorded as digital
signals to an MD. Sound from the radio or AUX
is converted from analog signals to digital sig-
nals during recording.
CAUTION
• Do not bump or sway the main unit during MD
recording/editing. Be especially careful while
"WRITING" is displayed. Such movement may
interfere with MD playback.
CD-R/CD-RW recording
• When you record sound from a CD-R or CD-
RW (digital audio) onto an MD, pressing
displays "SCMS CANNOT COPY" in the
display window, and analog normal speed
recording automatically starts.
• You can manually select analog recording by
holding down for 4 or more seconds and
pressing once again while "ANALOG
REC?" is displayed.
Press .
• Each time you press , the display
toggles as follows.
NOTE
• The recorded sound level is automatically adjusted.
• Sound-synchronized recording is employed for
recording sound from other equipment (AUX).
With sound-synchronized recording, this product
automatically identifies sound signals from the
sound source and starts recording. When sound
from the sound source pauses for 30 or more
seconds, this product automatically quits
recording. The blank time between the last
recorded track and the next recorded track is
approximately 2 seconds.
1
Select a sound source .
2
Insert an MD for recording.
• Confirm the MDLP, "LP: " indicator and
group recording settings. ( pages 23
and on the left)
• Close the write protect knob on the MD
( page 45).
3
Hold down on the main unit
for approximately 4 seconds to
display the track mark options.
Things You Should Know
about MD Recording
Recording Sound from Radio,
Cassette Tape or Other
Equipment
Sound source Operation
Radio broad-
cast Select the radio station whose broad-
cast you want to record (
page
14).
Cassette tape
playback Insert a cassette tape for playback,
press , and then press .
Press to select the reverse
mode when necessary.
Sound from
other equip-
ment (AUX)
Press repeatedly to select AUX,
and prepare playback on the other
equipment (
page 22).
"LP: " indicator setting
:For adding "LP: " to the track title.
:For deleting "LP: " from the track title.
UX-Q1[UB]-09.fm 25 ページ ２００４年８月５日 木曜日 午後１時９分