JVC CA-UXQ1S - Manual (Page 39)

Introduction
36
English
Editing MDs
You can join two adjacent groups.
Example: Joining group 1 and group 2
■While the track in the second group to
which you want to join the first group (group
2 in the example shown above) is being
played back
1
Press repeatedly to select
"JOIN GR?".
2
Press .
• Two adjacent group numbers appear. When
no group is formed in the MD, "--" appears.
• You can also select a group number with
or .
3
Press .
4
Press .
NOTE
• During editing, you can return to the previous step
by pressing . You can quit the editing operation
by pressing .
• You cannot join two groups separated by a track
not belonging to either group. "CANNOT JOIN"
appears, and display returns to the previous
step.
• When you join two groups that have titles, the
title of the first group remains as the title of the
joined group.
Example: Moving group 2
■While a track in the group you want to move
(group 2 in the example shown above) is
being played back
1
Press repeatedly to select
"MOVE GR?".
2
Press .
• You can also select a group number with
or .
3
Press .
4
Press or to select the
group number to which you want
to move the specified group.
(Group 1 is selected in the example shown
above)
5
Press .
6
Press .
NOTE
• During editing, you can return to the previous step
by pressing . You can quit the editing operation
by pressing .
Joining Groups (JOIN GR)
Group 1 Group 2
Group 1
Group 1 Group 2
Track not belonging to either group
Moving a Group (MOVE GR)
Group 1 Group 2
Group 1 Group 2
UX-Q1[UB].book 36 ページ ２００４年７月２１日 水曜日 午後１時４４分