JVC CA-UXQ1S - Manual (Page 36)

33
(Continued)
Editing Tracks
6
Press .
NOTE
• During editing, you can return to the previous step
by pressing . You can quit the editing operation
by pressing .
Example: Erasing tune B
CAUTION
• Once you erase a track, you cannot retrieve it.
Before erasing a track, confirm that you no longer
need it.
■While the track you want to erase (track 2 in
the example shown above) is being played
back
1
Press repeatedly to select
"ERASE?".
2
Press .
• You can also select a track number with
, or the number buttons. Refer to
"Using the number buttons" ( page 10).
3
Press .
• " " is added in front of the selected track
number.
• When you select a wrong track, press
to delete " ".
• You can select up to 15 tracks to be erased
with , or the number buttons, and
. Refer to "Using the number buttons"
( page 10).
• When you select the 16th track and press
, "MEMORY FULL" appears.
4
Press .
5
Confirm that you no longer need
the tracks, and then press
.
NOTE
• During editing, you can return to the previous step
by pressing . You can quit the editing operation
by pressing .
CAUTION
• Once you erase a track, you cannot retrieve it.
Before erasing a track, confirm that you no longer
need it.
1
Press repeatedly to select
"ALL ERASE?".
2
Press .
3
Confirm that you no longer need
all tracks, and then press .
NOTE
• You can quit the editing operation by pressing .
Erasing a Track (ERASE)
Erasing All Tracks (ALL
ERASE)
All tracks are erased.
UX-Q1[UB].book 33 ページ ２００４年７月２１日 水曜日 午後１時４４分