JVC CA-UXQ1S - Manual (Page 25)

Introduction
22
English
Listening to Cassette T
apes/
Listening to Other Equipment
3
Press .
• Playback starts.
• When the main unit is turned off, pressing
automatically turns on the main unit.
• Each time you press , the cassette tape
playback direction changes. The initial play-
back direction after you have inserted a cas-
sette tape is always the normal direction.
• The cassette tape playback direction indica-
tor facing right is displayed during normal
playback. The indicator facing left is dis-
played during reverse playback.
Press .
• Each time you press , the display tog-
gles as follows.
Listening to Other Equipment
You can listen to sound from other audio equip-
ment connected to the AUX terminals on the rear
side of the main unit (
page 9).
1
Press repeatedly to select
"AUX".
2
Start other equipment playback.
• Refer to the operation manual for the con-
nected equipment.
3
Adjust the volume and make other
necessary settings.
• For adjusting the volume and making other
necessary settings, refer to "Basic Opera-
tions" (
pages 11 - 13).
You can adjust the sound input level from the con-
nected equipment.
• While the sound source is selected to AUX, you
can adjust the sound input level.
Hold down until the input level
appears.
• Each time you hold down , the display
toggles as follows.
Press .
• Each time you press , the display tog-
gles as follows.
Changing the Display in the
Display Window
(Time display)
Clock display
Sound source name
(With an MD loaded)
Display of remaining
time for MD recording
Adjusting the Sound Input
Level from Other Equipment
Changing the Display in the
Display Window
For ordinary use. (factory setting)
For increasing the input level
from the connected equipment.
(Time display)
Clock display
Sound source name
(With an MD loaded)
Display of remaining
time for MD recording
UX-Q1[UB]-08.fm 22 ページ ２００４年８月１０日 火曜日 午後５時１分