Recording sound to mds, Recording all tracks from a cd to an md – JVC CA-UXQ1S User Manual

Page 26

Advertising
background image

23

Recording Sound

Recording Sound to MDs

Main unit

Remote control

1

Press

, and then press

.

• The CD is selected as the sound source and

playback is stopped.

2

Insert an MD.

• Close the write protect knob on the MD

beforehand (

page 45).

3

Press

to select the MDLP

mode.

• Each time you press

, the display

toggles as follows.

• As you change the MDLP mode

(SP

→LP2→LP4), the sound quality also

changes. When you want to record sound at

the best possible quality, select the SP

mode.

• When you use an MD car audio system,

portable MD player or other MD player that

is not compatible with the MDLP mode,

select the SP mode.

4

Press

to set group recording.

• Each time you press

, the display

toggles as follows.

• You can form or cancel a group after the

recording finishes. (

pages 34 and 37)

5

Press

to select the recording

speed.

• Each time you press

, the display

toggles as follows.

• Recorded sound quality is the same for both

"HIGH SPEED" and "NORMAL REC".

• You cannot listen to the sound during high

speed recording.

6

Press

on the main unit.

Example display during recording:

• When recording finishes, the color pattern of

the display window and CD tray changes to

the color pattern set in "MANUAL" to inform
you that recording has finished (

pages

12 and 13).

• When "HCMS CANNOT COPY" appears,

refer to pages 44 and 46.

Recording All Tracks from a

CD to an MD

: For standard stereo recording

(Maximum recording time is 80
minutes with an MD 80).

: For ×2 extended stereo recording

(Maximum recording time is 160

minutes with an MD 80).

: For ×4 extended stereo recording

(Maximum recording time is 320

minutes with an MD 80).

: Activates group record-

ing (factory setting).

: Cancels group recording.

: High speed recording

When CD playback time is

30 or more minutes, the

recording speed is ×5, and

when the playback time is

less than 30 minutes, the

recording speed is ×4.

: Normal speed recording

MDLP mode

Remaining
time for
recording

This indicator
lights up during
high speed
recording.

This indicator
lights up during
group recording.

UX-Q1[UB]-09.fm 23 ページ 2004年7月27日 火曜日 午前11時32分

Advertising
This manual is related to the following products: