JVC CA-UXQ1S - Manual (Page 42)

39
Convenient Functions
Using the Timers
When the specified time passes, the main unit
automatically turns off.
Press .
• Each time you press , the time display
(in minutes) toggles as follows.
Example: To set the sleep timer to 60 minutes
NOTE
• When you set the sleep timer, the display window
automatically dims.
• Before the clock has been set (While "0:00" is
flashing), when you press , "CLOCK
ADJUST!" appears.
• Press repeatedly to select the time again.
• With the sleep timer activated, press once.
You can use the recording timer function to record
FM/AM broadcasts or sound from other equipment
to an MD or cassette tape.
You can enter up to three timer settings in total for
the recording timer and the playback timer
(
page 41).
NOTE
• Timer settings remain unchanged until the timer is
replaced by new setting.
1
Prepare to record.
2
Press repeatedly to select
"TIMER1", "TIMER2" or "TIMER3".
Example: When "TIMER1" is selected
3
Press .
4
Set the starting time and ending
time.
Example:To set the recording time from 6:30
a.m. to 6:45 a.m.
• For setting the clock, refer to "Setting the
Clock" ( page 10).
Entering the hour → → Entering the
minute →
Sleep Timer
Cancel (Sleep
indicator disappears.)
Sleep indicator
Changing the sleep timer setting
Confirming the sleep timer setting
(remaining time)
Recording Timer
Radio Preset the radio station whose
broadcast you want to record. (
page 15)
Other
equipment Follow the operation manual for the
equipment.
MD recording Insert an MD. (
page 17)
Cassette
tape
recording
Insert a cassette tape. ( page 21)
Timer number
Set the clock beforehand. ( page 10)
UX-Q1[UB].book 39 ページ ２００４年７月２１日 水曜日 午後１時４４分