JVC UXQD90S - Manual (Page 109)

48
C
onv
enien
t F
unc
tio
ns
Convenient Functions
13
Press .
• The settings appear in the display window.
Confirm the settings.
14
Press to turn off the main
unit.
• While the recording timer is functioning, the
volume is set to "0" and no sound is pro-
duced from the speakers or headphones.
• The recording timer is available only when
the main unit is turned off.
NOTE
• During operation, you can return to the previous
step by pressing . You can quit the recording
timer settings by pressing . The settings are
not stored.
In step 2 on page 47, select the timer number you
want to cancel, and then press
.
Even when you cancel the recording timer, the set-
ting remains stored.
In step 2 on page 47, select the timer number you
want to activate, and press . Then turn off the
main unit.
In step 2 on page 47, press repeatedly. If you
want to quit checking the recording timer, press
.
Set the recording timer again from step 1 on page 47.
NOTE
• When you want to activate two or three recording
timers, leave a blank time of 2 or more minutes
between the ending time of the first recording timer
and the starting time of the second recording timer.
If the blank time is less than 2 minutes, the second
recording timer does not work.
• When the power plug is disconnected or the
power is interrupted, the recording timer settings
may be lost. If the settings are lost, set the clock
and recording timer again.
1
Prepare the sound source you
want to play back.
2
Press repeatedly to select
"TIMER1", "TIMER2" or "TIMER3".
Example: When "TIMER2" is selected
3
Press .
4
Press , and to set
the starting time and ending time.
Example: When you want to set the playback
time from 7:00 a.m. to 7:30 a.m.
• You can use the number buttons to set the
playback time. Refer to "Using the number
buttons" (
page 16).
• For setting the clock, refer to steps 2 to 5 in
"Setting the Clock" ( page 16).
Entering the "hour" → → Entering the
"minute" →
5
Press or to select
"ONCE" or "WEEKLY".
ONCE : The playback timer works once.
WEEKLY : The playback timer works weekly
or every day.
6
Press .
(Continued on next page)
For the locations of remote control
buttons, refer to page 46.
Canceling the recording timer
Activating the recording timer again
Confirming the recording timer
Changing the recording timer
Playback Timer
Disc Make sure that a disc is loaded.
(
page 22)
Cassette
tape
Insert a cassette tape. ( page 42)
Radio Preset the radio station whose broadcast
you want to listen to. (
page 21)
Other
equipment
Follow the operation manual for the
equipment.
Timer number
UX-QD90[UG_UX]-05.fm Page 48 Friday, September 30, 2005 8:51 AM